Kyoritsu 2009R Manuale Utente Scaricare il pdf (Pagina 20)

① Set the function selector switch to the "



Ｖ" position. “DC"

should be shown on the upper left corner of the display.

② Slide the terminal cover to the left to disclose the V/Ω and COM

terminals. Plug the red test lead into the V/Ω terminal and the

black test lead into COM terminal.

③ Connect the tip of the red and black test leads to the positive (+)

and negative (-) sides of the circuit under test respectively. Take

the reading on the display. If the connection is reversed, the

display indicates the "-" sign.

６－４ AC Voltage Measurements

 DANGER

● Never use the instrument on a circuit above 750VAC. This may

cause electrical shock hazard and damage to the instrument or

the circuit under test.

● Do not make measurement with the battery compartment cover

removed.

● Keep your fingers and hands behind the barrier during

measurement.

① Set the function selector switch to the " ∼ V" position. "AC"

should be shown on the upper left corner of the display.

② Slide the terminal cover to the left to disclose the V/Ω and COM

terminals. Plug the red test lead into V/Ω terminal and the black

test lead into the COM terminal.

Red test lead

Black

test lead

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

Nessun commento

Kyoritsu 2009R Manuale Utente Pagina 20